• Welcome to the E-Goat :: The Totally Unofficial RAF Rumour Network.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

puma fuel system question

34
0
0
Doing the fuel contents indication test. Get a high (500+Pf) reading on capacitance ...guage says about 60KG fuel.
I know the tanks need to be empty to do the test and the riggers say they've drained the fuel.
Any ideas? knackered probe? still fuel in the tanks?
Not got much experience of Puma fuel system.....yet!!

Gonna get the tanks checked again and get another probe to slave in.
 

Ralphy

LAC
10
0
0
You'll probably find that the riggers have drained the tanks from a bowser and left the residual fuel in the bottom! Go underneath and open the drain valves from there and you will dump a hell of a lot............probably the amount that youre getting on the guages! P.S. remember to do both sides!!! Good luck!
 

Stevienics

Warrant Officer
1000+ Posts
4,931
107
63
Get a rigger to shove a fuel bin underneath then unplug and crack the nuts on the capacitor unit. Get the idle sod to put his money where his mouth is.
 
Back
Top